DPD Delivery Across Ireland | Click & Collect in Cork | Call: (025) 32577 | ⭐⭐⭐⭐⭐ on TrustIndex
Basket

MIG Accessories

MIG accessories cover the consumables and ancillaries you need to keep a MIG setup running: contact tips, gas regulators, flux-cored wire for gasless work, and welding tables. Tips wear out fast on higher-amperage runs, regulators control gas flow to match your joint prep and travel speed, and a proper table gives you flat reference and clamp points. Stock the right tip size for your wire diameter, and check regulator fitment—disposable cylinder regs don't fit industrial bottles.

— Jump to Filters

Filter & sort

MIG Accessories
Default sorting
Price
Reset
Brand
0 selectedReset
Weekly Deal
Reset

Contact tips are sized to wire diameter—1mm tips for 1mm wire. MB14, MB25, and MB36 refer to torch models; confirm which neck your torch uses before ordering. Tips erode from arc heat and spatter buildup, so keep spares on hand if you're mid-job.

Gas regulators thread onto argon/CO₂ cylinders. Industrial bottles use a different valve thread than disposable cans—one-gauge, two-gauge, and no-gauge variants all serve the same purpose, but two-gauge models show cylinder pressure and delivery pressure separately, which helps you spot a near-empty bottle before it runs out mid-bead. Single-gauge regs show delivery only; no-gauge types are basic on/off flow control. Match the regulator to your cylinder type or you'll strip threads.

Gasless flux-cored wire (A5.20 Class E71T-GS) runs without shielding gas—the flux burns to create a slag shield. It spatters more than gas-shielded solid wire and the bead needs chipping, but it works outdoors in light wind where gas would blow away. Common in 0.9mm diameter; buy by spool weight depending on how much you're laying down.

Sealey welding tables come in steel with grid or slot patterns for clamping jigs and holding work square. A flat table makes setup faster and keeps distortion in check on multi-pass work.