DPD Delivery Across Ireland | Click & Collect in Cork | Call: (025) 32577 | ⭐⭐⭐⭐⭐ on TrustIndex
Basket

Soldering & Heating

Soldering irons, tips, and bench accessories for electrical work, electronics repair, and light fabrication. This range covers dual-wattage irons from Premier — switchable between 15/30W or 40/80W depending on the joint — plus replacement tips, solder suckers for desoldering, and helping-hand stands with magnifiers. Pick wattage to match the work: lower for PCBs and fine wire, higher for cable lugs and chassis tabs.

— Jump to Filters

Filter & sort

Soldering & Heating
Default sorting
Price
Reset
Brand
0 selectedReset
Weekly Deal
Reset

Dual-wattage irons let you run cool for heat-sensitive components or switch up when soldering larger conductors or grounding straps. The 15/30W models suit PCB rework and small terminal blocks; 40/80W handles heavier gauge wire and automotive terminals without waiting for the bit to recover. Straight tips are general-purpose; chisel profiles spread heat across larger pads. Long-life tips use plated copper to resist pitting — worth it if you're soldering daily, less critical for occasional use.

Replacement tips wear when flux residue carbonises or when you overheat the plating. Clean with a damp sponge between joints, not a file. If the tip no longer wets with solder, replace it — trying to force heat through an oxidised surface damages components and wastes time. Solder suckers clear through-holes and lifted pads faster than wick alone; the spring-loaded plunger gives you one hand free to hold the iron. Helping-hand stands with magnifiers hold small assemblies steady and let you see conformal coating, cold joints, or bridged pins without repositioning a lamp.