Inverter MIG, TIG & MMA 200Amp
€1,153.06 Excl. VAT: €937.45
• Manufactured with a pressed steel outer casing.
• Suitable for arc welding a variety of rods including rutile, basic and stainless from Ø1.6mm to Ø4mm.
• Fan cooled DC power supply for MIG and TIG, suitable to weld steel, stainless steel, cooper, nickel, titanium and their alloys.
• Rocker switch between MIG, TIG* and MMA* welding modes (*optional extra torches required).
• Thermal overload protection which automatically switches unit off when it exceeds maximum temperature.
• Fully functional front panel with self explanatory pictograms for each dial and switch.
• Wire feed control used to control the speed of wire fed through the torch during welding.
• Polarity change terminals allow the operator to change polarity of welding torch depending on whether the applications are MIG or flux-cored welding.
• Includes 3mtr MIG torch, 3mtr Earth cable, gas hose and regulator.
• Contact Tips: 0.6, 0.8 (x2), 0.9, 1.0mm.
- Description
- Additional information
- Reviews (0)
- Brand
Description
- Manufactured with a pressed steel outer casing.
- Suitable for arc welding a variety of rods including rutile, basic and stainless from Ø1.6mm to Ø4mm.
- Fan cooled DC power supply for MIG and TIG, suitable to weld steel, stainless steel, cooper, nickel, titanium and their alloys.
- Rocker switch between MIG, TIG* and MMA* welding modes (*optional extra torches required).
- Thermal overload protection which automatically switches unit off when it exceeds maximum temperature.
- Fully functional front panel with self explanatory pictograms for each dial and switch.
- Wire feed control used to control the speed of wire fed through the torch during welding.
- Polarity change terminals allow the operator to change polarity of welding torch depending on whether the applications are MIG or flux-cored welding.
- Includes 3mtr MIG torch, 3mtr Earth cable, gas hose and regulator.
- Contact Tips: 0.6, 0.8 (x2), 0.9, 1.0mm.
| Model No: | INVMIG200 |
| Duty Cycle: | |
| MIG: | 20%@200A, 100%@90A |
| TIG: | 20%@200A, 100%@90A |
| Arc: | 20%@170A, 100%@76A |
| Wire Capacity: | 5kg |
| Electrode Capacity: | Ø1.6-4mm |
| Absorbed Power: | 6.64kW |
| Supply: | 230V |
| Insulation: | IP21S |
| Protection: | F |
| Weight: | 20kg |
| MIG Torch: | Euro Non-Live BINZEL® MB15* |
| Arc Accessory Kit (Optional): | INVMMA2 |
| TIG Accessory Kit (Optional): | TIG10S |
| *Included as standard |
Additional information
| Manufacturer | Sealey |
|---|
Be the first to review “Inverter MIG, TIG & MMA 200Amp”
You must be logged in to post a review.
Brand
Sealey

Reviews
There are no reviews yet.