Hi. What are you looking for? Tell us what you need and we'll get back to you.
Lathe/Drilling
Lathe and drilling accessories cover the tooling and work-holding you need to set up precision cuts, bore accurate holes, and hold work securely on the machine. From MT taper chucks and live centres to steady rests and indexable tooling, these parts determine how repeatable your setup is and how cleanly the cut finishes. Pick the right Morse taper for your headstock or tailstock, match chuck capacity to your typical work diameter, and check thread pitch before ordering cutting gear.
Showing all 17 results
-
Not yet ratedSealeyCollet Set MT2-M10 3-10mm- MT2-M10 collet set, 3-10mm
- Fits Sealey SM2503 lathe/drill
€205.42€207.50€167.01€168.70 -
Not yet ratedSealeyDrill Head for Mini Lathe SM2503A- 150W motor, 100-1300 rpm
- 10mm max drilling capacity
- MT2 spindle taper, 30mm travel
€913.21€922.44€742.45€749.95 -
Not yet ratedSealeyFace Plate 112mm- 112mm diameter face plate
- For SM2503 lathe/drill
€94.32€95.26€76.68€77.45 -
Not yet ratedSealeyFixed Steady Rest- Fits SM2503 lathe/drill
- Fixed steady rest
- Weight 0.89 kg
€86.70€87.58€70.49€71.20 -
Not yet ratedSealeyHSS End Mill Set MT2 3-10mm- HSS end mill set
- MT2 taper, Ø3-10 mm
€89.74€90.65€72.96€73.70 -
Not yet ratedSealeyIndexable Carbide End Mill MT2-M10 16mm- Indexable carbide end mill
- MT2-M10 taper fit
- 16 mm diameter
€136.94€138.31€111.33€112.45 -
Not yet ratedSealeyLive Centre MT2- MT2 taper fit
- For SM2503 lathe/drill
€21.25€21.46€17.28€17.45 -
Not yet ratedSealeyMetalworking Mini Lathe 250mm- 80mm 3-jaw self-centring chuck
- Cast iron + steel, 26.2 kg
€1,400.29€1,414.44€1,138.45€1,149.95 -
Not yet ratedSealeyMill Chuck Set MT2-M10 3-10mm- MT2 spindle, M10 thread
- Collet capacity Ø3-10mm
- For SM2503 mini lathe/drill
€365.25€368.94€296.95€299.95 -
Not yet ratedSealeyMini Lathe & Drilling Machine- Max drilling capacity 10 mm
- Distance between centres 250 mm
- MT2 spindle, MT1 tailstock taper
€2,130.91€2,152.44€1,732.45€1,749.95 -
Not yet ratedSealeyMoving Steady Rest for SM2503- Accessory for SM2503 lathe/drill
- Moving steady rest type
- Weight 0.54 kg
€68.44€69.13€55.64€56.20 -
Not yet ratedSealeyParting Tool & Bore Cutter Set 2pc- Parting tool + bore cutter
- Fits SM2503 lathe/drill
€47.12€47.60€38.31€38.70 -
Not yet ratedSealeyQuick Vice 50mm- 50mm quick vice
- SM2503 lathe/drill compatible
€171.94€173.68€139.79€141.20 -
Not yet ratedSealeyRevolving Centre MT1- MT1 revolving centre
- For SM2503 mini lathe/drill
€56.26€56.83€45.74€46.20 -
Not yet ratedSealeyTailstock Chuck MT1 10mm- MT1 tailstock chuck
- 10 mm capacity
- For SM2503 lathe/drill
€73.00€73.74€59.35€59.95 -
Not yet ratedSealeyThread Cutting Gear Kit Metric- Metric thread cutting gears
- Fits SM2503 lathe/drill
€50.17€50.68€40.79€41.20 -
Not yet ratedSealeyTool Holder (Parting & Bore) Set 2pc- 2-piece parting & bore set
- Fits SM2503 lathe/drill
€76.05€76.81€61.83€62.45
Morse taper sizes matter—MT1 fits smaller lathes and tailstocks, MT2 suits mid-range machines. Check your machine spec before ordering a chuck or live centre; a mismatch won't seat and the taper will slip under load. Live centres reduce friction on long work; fixed centres are fine for light facing but generate heat on extended turning. If you're supporting slender shafts or long bar stock, a steady rest keeps deflection in check—fixed steadies bolt to the bed, moving steadies follow the carriage. The difference shows up in chatter marks and out-of-round bores.
Indexable carbide tooling uses replaceable inserts, so you swap the edge instead of resharpening the whole cutter. End mills with MT shanks lock straight into the tailstock or vertical head for milling flats or drilling centres. Thread-cutting kits include taps, dies, and pitch gauges—metric sets cover M3 to M12 in 0.5, 0.75, 1.0, and 1.25 pitches, which handles most general engineering work. Parting and boring tool holders take standard-size HSS or carbide blanks; check the shank height matches your toolpost.
Quick vices clamp work for drilling or light milling without needing to indicate and bolt a four-jaw. Jaw width and throat depth limit what fits—50 mm suits small components, anything bigger needs a larger frame or a proper machine vice. Tailstock chucks hold drill bits, reamers, or centre drills; capacity should cover your common shank sizes, typically 1–10 mm or 3–16 mm depending on model.