Cutting Discs

A cutting disc is a consumable tool, designed for cutting different types of surfaces. Structurally it is a disc, the surface of which is covered with a layer of abrasive particles. This covering is fastened by a special bond – ceramic, volcanic or Bakelite. When choosing a cutting disc, take into account that these consumables are divided into three main groups:

  • Discs for metal. Its range of application is cutting of reinforcement, profile pipes, steel corners, channel bars, sheet steel.
  • Discs for wood. They are also used for cutting plastic pipes, window profiles, gypsum and MDF boards. Made of high –strength steel, the outer edge of the disc is equipped with sharp teeth.
  • Cutting discs for the stone. Designed to work with such materials as sand-lime brocks, paving slabs, stone structures, asbestos-cement materials.
  • CVJ Boots

CVJ boots are the protective rubber nozzles made of rubber or thermoplastic, protecting the CV joint from moisture and dirt and preventing lubricant loss inside the CVJ. A good working condition of these anthers is a necessary condition for a reliable CRV operation. If the boot is damaged, CRV lubricant will leak through the hole formed due to the centrifugal force during the car movement. Moreover, water and impurities get inside CRV and it breaks down as a result. The only way to avoid problems is regular inspections and timely boot replacement. If there are some cracks on the surface of the anther, it is extremely important to replace it with a new one. If there are holes, fragmentations, or if a boot comes off the place, most likely the change of CV is required. You can choose the most durable and reliable CVJ boots in our online shop.

View as Grid List

Items 1-16 of 23

Page
per page
Set Descending Direction
  1. Grinding Disc Ø58 x 4mm 10mm Bore
    €7.63 €6.20
  2. Cutting Disc Ø75 x 1mm 10mm Bore
    €1.78 €1.45
  3. Cutting Disc Ø75 x 2mm 10mm Bore
    €1.97 €1.60
  4. Cutting Disc Ø355 x 2.8mm 25.4mm Bore
    €12.24 €9.95
  5. Cutting Disc Ø305 x 2.8mm 25.4mm Bore
    €9.78 €7.95
  6. Cutting Disc Ø230 x 1.9mm 22mm Bore
    €5.35 €4.35
  7. Cutting Disc Ø230 x 3mm 22mm Bore
    €5.66 €4.60
  8. Cutting Disc Ø180 x 3mm 22mm Bore
    €4.86 €3.95
  9. Cutting Disc 150 x 1.6mm 22mm Bore
    €4.86 €3.95
  10. Cutting Disc Ø125 x 1.6mm 22mm Bore
    €2.71 €2.20
  11. Cutting Disc Ø125 x 1mm 22mm Bore
    €2.58 €2.10
  12. Cutting Disc Ø125 x 3mm 22mm Bore
    €2.71 €2.20
  13. Cutting Disc Ø115 x 1.6mm 22mm Bore - Pack of 5
    €8.55 €6.95
  14. Cutting Disc Ø115 x 1.6mm 22mm Bore
    €1.97 €1.60
  15. Cutting Disc Ø115 x 1mm 22mm Bore - Pack of 5
    €8.12 €6.60
  16. Cutting Disc Ø115 x 1mm 22mm Bore
    €1.97 €1.60
View as Grid List

Items 1-16 of 23

Page
per page
Set Descending Direction