Description
Professional 150 bar cleaning from a 230 V single-phase supply. The Power Jet 150 (PJ150.600) is a professional cold-water pressure washer from Prex Pro, the pressure-washer division of SIMMM Engineering. Designed and manufactured in Italy for demanding commercial cleaning, it combines a low-speed motor with an in-house AXA brass pump.
It combines adjustable 30–150 bar working pressure with a 600 L/h flow rate, giving you the control to move from lighter vehicle and equipment washing to more persistent workshop, yard and machinery cleaning.
Professional cleaning performance
- Adjustable pressure: Set the working pressure between 30 and 150 bar (up to 2,170 PSI) to suit the surface and level of dirt.
- High water flow: A 600 L/h output (10 L/min) helps rinse loosened dirt away efficiently.
- Trade-friendly power supply: The 3 hp motor operates from a 230 V single-phase, 50–60 Hz electrical supply.
- Low-speed operation: The 1,450 rpm motor is matched to the professional AXA pump for sustained cleaning work.
- Detergent control: A built-in 12 L tank and adjustable detergent delivery support cleaning and degreasing applications.
AXA brass pump and protective systems
At the centre of the Power Jet 150 is a self-priming AXA brass pump with ceramic-coated stainless-steel plungers, stainless-steel valves and double water seals. An integrated adjustable bypass regulates pressure, while the total-stop system and thermal switch help protect the machine during use.
A rubber-protected 63 mm pressure gauge keeps the operating pressure easy to monitor. Front-facing connections, large wheels, a rotomoulded chassis and a rear accessory holder make the washer practical to set up, move and store.
Technical specifications
| Manufacturer model | PJ150.600 |
|---|---|
| Machine type | Professional cold-water pressure washer |
| Working pressure | 30–150 bar (2,170 PSI) |
| Flow rate | 600 L/h (10 L/min; 2.6 GPM) |
| Electrical supply | 230 V / single phase / 50–60 Hz |
| Motor | 3 hp, 1,450 rpm |
| Rated current | 13.8 A |
| Nozzle | 0.35 |
| Water inlet | 3/4-inch female |
| High-pressure outlet | M22 × 1.5 |
| Maximum inlet-water temperature | 70°C |
| Maximum noise emission | 78 dB |
Supplied as standard
Prex Pro lists the following equipment for the PJ150.600 configuration:
- Professional gun with swivel joint (03.428.2)
- 465 mm Vario Jet lance (03.429)
- 8 m high-pressure hose (04.454.3)
- Multireg nozzle, 1.20 (03.432.120)
Compatible Prex Pro accessories
The supplier also lists a rotating-nozzle lance, sand or soda blasting kit, rotating brush, regulated foam lance and drain nozzle as compatible optional accessories. These accessories are sold separately and availability should be confirmed before ordering.
Supplier operating guidance
Dry-running information
The Prex Pro datasheet describes dry-running capability for up to five hours. The supplier’s instruction manual also warns that dry running may seriously damage the pump gaskets. Keep the machine connected to an adequate clean-water supply and do not intentionally operate it dry.
The official technical datasheet and English instruction manual are available in the Downloads tab.
Reviews
There are no reviews yet.